What causes water hammer in a house?
I'll answer
Earn 20 gold coins for an accepted answer.20
Earn 20 gold coins for an accepted answer.
40more
40more
Ethan Davis
Works at the International Committee of the Red Cross, Lives in Geneva, Switzerland.
As a domain expert in fluid dynamics and plumbing systems, I can explain the phenomenon of water hammer and its causes in a residential setting.
Water hammer is a pressure surge or wave caused by the sudden stop or change in the velocity of fluid flow—most commonly in a plumbing system. This can happen for several reasons:
1. Quick Valve Closure: If a valve is closed too quickly, the water that was moving at high speed has nowhere to go and is forced to stop abruptly. This causes a pressure wave to move back through the system.
2. Pump Shutdown: Similarly, if a pump that is pushing water through a system is turned off suddenly, the water in the pipes continues to move and then is forced to stop, creating a water hammer effect.
3. Pipe Expansion and Contraction: Temperature changes can cause pipes to expand and contract. If the pipe contracts while water is flowing, it can create a sudden stoppage and pressure surge.
4. Pressure Reduction: A sudden drop in the supply pressure from the main water source can also cause water hammer.
5. Pipe Configuration: The layout of the pipes can also contribute to water hammer. Sharp bends, loops, or areas where water can pool can exacerbate the problem.
To mitigate water hammer, one can:
- Install soft start and stop valves that close more gradually.
- Use air chambers or surge arrestors that absorb the pressure surge.
- Ensure proper pipe sizing and layout to minimize abrupt changes in direction or flow.
- Install expansion tanks to handle temperature-induced pressure changes.
Water hammer is a pressure surge or wave caused by the sudden stop or change in the velocity of fluid flow—most commonly in a plumbing system. This can happen for several reasons:
1. Quick Valve Closure: If a valve is closed too quickly, the water that was moving at high speed has nowhere to go and is forced to stop abruptly. This causes a pressure wave to move back through the system.
2. Pump Shutdown: Similarly, if a pump that is pushing water through a system is turned off suddenly, the water in the pipes continues to move and then is forced to stop, creating a water hammer effect.
3. Pipe Expansion and Contraction: Temperature changes can cause pipes to expand and contract. If the pipe contracts while water is flowing, it can create a sudden stoppage and pressure surge.
4. Pressure Reduction: A sudden drop in the supply pressure from the main water source can also cause water hammer.
5. Pipe Configuration: The layout of the pipes can also contribute to water hammer. Sharp bends, loops, or areas where water can pool can exacerbate the problem.
To mitigate water hammer, one can:
- Install soft start and stop valves that close more gradually.
- Use air chambers or surge arrestors that absorb the pressure surge.
- Ensure proper pipe sizing and layout to minimize abrupt changes in direction or flow.
- Install expansion tanks to handle temperature-induced pressure changes.
reply(1)
Helpful(1122)
Helpful
Helpful(2)
Works at the International Atomic Energy Agency, Lives in Vienna, Austria.
A water hammer commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. This pressure wave can cause major problems, from noise and vibration to pipe collapse.
2023-04-13 14:02:35
Benjamin Martin
QuesHub.com delivers expert answers and knowledge to you.
A water hammer commonly occurs when a valve closes suddenly at an end of a pipeline system, and a pressure wave propagates in the pipe. This pressure wave can cause major problems, from noise and vibration to pipe collapse.
