How do you make colloidal silver at home?
I'll answer
Earn 20 gold coins for an accepted answer.20
Earn 20 gold coins for an accepted answer.
40more
40more
Lucas Lewis
Studied at the University of Edinburgh, Lives in Edinburgh, Scotland.
As an expert in the field of chemistry with a focus on colloidal solutions, I must emphasize that making colloidal silver at home can be a complex process and should be approached with caution. It's important to note that the production of colloidal silver for medical purposes is not supported by scientific evidence and can be potentially harmful. However, for educational or experimental purposes, here's a general outline of how it might be done:
1. Sterilization: Ensure all equipment is clean and sterile to prevent contamination.
2. Water Purification: Use distilled or reverse osmosis water to avoid impurities.
3. Electrolyte Preparation: Prepare an electrolyte solution, which may include silver ions from a silver nitrate solution.
4. Electrode Setup: Place a silver anode and a cathode (often stainless steel) into the water.
5. Electrolysis: Apply a low-voltage direct current to the electrodes, which will cause silver ions to be reduced to metallic silver at the cathode, forming a colloid.
6. Monitoring: Monitor the color of the solution, which should gradually turn yellow, indicating the presence of silver nanoparticles.
7.
Harvesting: Once the desired concentration is reached, the colloidal silver can be harvested.
8.
Storage: Store the colloidal silver in a dark, airtight container to prevent degradation.
Please remember that this is a simplified explanation and actual procedures can be more intricate. It's also crucial to follow safety protocols, including wearing protective gear and working in a well-ventilated area.
1. Sterilization: Ensure all equipment is clean and sterile to prevent contamination.
2. Water Purification: Use distilled or reverse osmosis water to avoid impurities.
3. Electrolyte Preparation: Prepare an electrolyte solution, which may include silver ions from a silver nitrate solution.
4. Electrode Setup: Place a silver anode and a cathode (often stainless steel) into the water.
5. Electrolysis: Apply a low-voltage direct current to the electrodes, which will cause silver ions to be reduced to metallic silver at the cathode, forming a colloid.
6. Monitoring: Monitor the color of the solution, which should gradually turn yellow, indicating the presence of silver nanoparticles.
7.
Harvesting: Once the desired concentration is reached, the colloidal silver can be harvested.
8.
Storage: Store the colloidal silver in a dark, airtight container to prevent degradation.
Please remember that this is a simplified explanation and actual procedures can be more intricate. It's also crucial to follow safety protocols, including wearing protective gear and working in a well-ventilated area.
Studied at University of California, Los Angeles (UCLA), Lives in Los Angeles, CA
EVERY 4 or 5 minutes you need to:Turn off the power,Remove the silver wires from the jar,Wipe the two silver wires with a paper towel AND a non-metallic pot scrubbing pad (e.g. 1/4�� thick nylon Scotchbright pad),Put the silver wires back into the water, and.Turn the power back on.
评论(0)
Helpful(2)
Helpful
Helpful(2)
Ethan Patel
QuesHub.com delivers expert answers and knowledge to you.
EVERY 4 or 5 minutes you need to:Turn off the power,Remove the silver wires from the jar,Wipe the two silver wires with a paper towel AND a non-metallic pot scrubbing pad (e.g. 1/4�� thick nylon Scotchbright pad),Put the silver wires back into the water, and.Turn the power back on.