How do you move a sketch in Solidworks?
I'll answer
Earn 20 gold coins for an accepted answer.20
Earn 20 gold coins for an accepted answer.
40more
40more
Owen Edwards
Works at Snapchat, Lives in Los Angeles, CA
As an expert in SolidWorks, I can guide you through the process of moving a sketch element within the software. Here's how you can do it:
1. Open the Sketch: Start by opening the sketch you want to edit in SolidWorks. You can do this by double-clicking on the sketch in the FeatureManager design tree.
2. Select the Element: Click on the element you want to move within the sketch. Make sure you're in the sketch editing mode.
3. Move the Element: Once the element is selected, you can move it by clicking and dragging it to the desired location within the sketch. You'll see the sketch lines and geometry update as you move the element.
4. Use the Move Command: Alternatively, you can use the Move command from the toolbar. Select the element, then click on the Move button (it looks like a cross with arrows pointing in four directions). You can then specify the distance and direction for the move or simply click and drag to move the element.
5. Constraints: If your sketch has constraints that affect the movement of the element, you might need to temporarily suppress or modify those constraints to move the element freely.
6. Finish the Sketch: After moving the element to the desired position, make sure to fully define the sketch by adding necessary dimensions and relations. Then, click the "Finish Sketch" button to exit the sketch editing mode.
1. Open the Sketch: Start by opening the sketch you want to edit in SolidWorks. You can do this by double-clicking on the sketch in the FeatureManager design tree.
2. Select the Element: Click on the element you want to move within the sketch. Make sure you're in the sketch editing mode.
3. Move the Element: Once the element is selected, you can move it by clicking and dragging it to the desired location within the sketch. You'll see the sketch lines and geometry update as you move the element.
4. Use the Move Command: Alternatively, you can use the Move command from the toolbar. Select the element, then click on the Move button (it looks like a cross with arrows pointing in four directions). You can then specify the distance and direction for the move or simply click and drag to move the element.
5. Constraints: If your sketch has constraints that affect the movement of the element, you might need to temporarily suppress or modify those constraints to move the element freely.
6. Finish the Sketch: After moving the element to the desired position, make sure to fully define the sketch by adding necessary dimensions and relations. Then, click the "Finish Sketch" button to exit the sketch editing mode.
reply(1)
Helpful(1122)
Helpful
Helpful(2)
Studied at the University of Edinburgh, Lives in Edinburgh, Scotland.
To move or copy entities:In sketch mode, do one of the following: Click Move Entities (Sketch toolbar) or Tools > Sketch Tools > Move. ... In the PropertyManager, under Entities to Move or Entities to Copy: Select sketch entities for Sketch item or annotations. ... Under Parameters: Sketch Type. ... Click .
2023-04-09 11:54:24
Sophia Moore
QuesHub.com delivers expert answers and knowledge to you.
To move or copy entities:In sketch mode, do one of the following: Click Move Entities (Sketch toolbar) or Tools > Sketch Tools > Move. ... In the PropertyManager, under Entities to Move or Entities to Copy: Select sketch entities for Sketch item or annotations. ... Under Parameters: Sketch Type. ... Click .
